How can we help?

Guide: Working with OpenStreetMap in Lumion 8 Pro

Avatar
Lumion Support Center
  • Updated
Follow

1. Guide: Working with OpenStreetMap in Lumion 8 Pro

This article applies to Lumion 8 Pro.

See also:

Knowledge Base: Guide: Working With OpenStreetMap in Lumion 7 Pro

Knowledge Base: Guide: Working With OpenStreetMap in Lumion 9 Pro

Lumion 7 Pro and above integrates OpenStreetMap to provide rapid in-context and masterplan content to a visualization.

  • This feature makes it possible to import buildings, roads, water, green spaces, and transit infrastructure as simple 3D shapes.
  • Rapidly add a whole suburb or city area to your visualization.
  • Simply search for the location and download the map directly in to Lumion.
  • This feature is currently in a beta status, and does not include satellite imagery and elevation data (DEM).

 

2. Here's how

2.1: Click on the Terrain mode button followed by the OpenStreetMap on/off button.

2.2: Click on the Pick GPS Coordinate button.

2.3: Click on the Search field to type in a place name or click anywhere on the map to place or move the GPS Coordinate pin.

  • Hold down the left mouse-buttton to pan.
  • Use the mouse scroll wheel to zoom in/out.

2.4: Drag the Map Range slider to adjust the area that will be downloaded. You may notice that the Map Range in kilometers/miles varies depending on the chosen location. This is due to the way cartography works as Earth (a spherical planet) has been projected onto a two-dimensional map. 

2.5: The red square is the area that will be downloaded and the triangular, blue arrow represents the camera position in your Lumion Scene, relative to the red square:

2.6: Click on the Start Download button to download the chosen area and wait for the download process to finish:

2.7: This whole area was built in a couple of minutes (download and finalization speeds are dependent on Map Range (size), your location and your local connection speeds):

2.8: Lumion 8 Pro and above lets you edit the position, height, heading and appearance of the OpenStreetMap model:

2.9: To show or hide individual buildings in the OpenStreetMap model, click on the Hide Buildings toggle button and then click on buildings to show or hide them:



2.10: Click on the Move OSM, Change Height OSM, Rotate OSM buttons to move and rotate the OpenStreetMap model via the Object Icon:

2.11: Click on the Change Appearance button and use the tickboxes to show or hide water, earth, buildings, land-use and roads:

2.12: Click on the Select Preset button to select a different look for the OpenStreetMap model: 

2.13: Use the Buildings Minimal Height and Randomize Buildings Height sliders to adjust and randomize the height of OpenStreetMap buildings that use default heights (i.e. not correct heights from the real world):

 

See also:

Knowledge Base: How do you resolve OpenStreetMap errors?

Video Tutorial: Build Mode: Use OpenStreetMap

Video Tutorial: Build Mode: Hide/show buildings from OpenStreetMap

Video Tutorial: Build Mode: Move and rotate OpenStreetMap

Video Tutorial: Build Mode: Changing the appearance of OpenStreetMap

Related articles